Introduction
The answer is no. Even though the vast majority of pressure washer accessories on the market today come with a standard M22 connector (that’s the male thread you see at the end of spray guns and high pressure hoses), there are some older machines and some models that come with different connectors.
The answer is no.
The answer is no. The connectors for your pressure washer are specific to the machine’s brand and model. That means that if you want to buy a new connector (or several), you’ll need to ensure it’s compatible with your machine before purchasing it. If you don’t, then it won’t work at all!
If a connector isn’t made by the manufacturer of your pressure washer, then it will be considered “off brand.” Off-brand connectors can work just as well as the manufacturer’s own part, but they may not last as long or perform as reliably in high-pressure environments like those created by power washing machines.
Even though the vast majority of pressure washers on the market today come with a standard M22 connector, there are some older machines and some models that come with different connectors.
Even though the vast majority of pressure washers on the market today come with a standard M22 connector, there are some older machines and some models that come with different connectors. If you have an older machine, you might need to buy a new connector. If you have a newer machine, you might need to buy a new connector as well.
The M22 male thread connector is generally considered to be an industry standard for pressure washer accessories.
The M22 male thread connector is generally considered to be an industry standard for pressure washer accessories. This means that any accessories with this type of connector should fit all machines from major brands, as well as smaller ones, such as the ones you might find in local hardware stores.
The M22 connector has a 2-inch long threaded section and a 1/4 inch diameter barrel. It’s typically used in high pressure hoses and spray guns, but you can use it on any high pressure hose as long as you have equipment that supports it.
It’s often used for high pressure hoses and spray guns because it helps prevent leaking.
Using the same connector on both your hose and spray gun is a great way to ensure that you don’t end up with a leaky connection. If you have different connectors on each, it could lead to a leaky connection, which can be frustrating and costly.
It’s also important to note that there are several types of connectors available, including those with an automatic shutoff and those without. The type of connector you choose depends on what type of pressure washer you have or plan to purchase in the future.
Pressure washer accessories with M22 male thread connectors fit all machines from major brands like Karcher, Kranzle, Lavor and Nilfisk ALTO.
M22 male connectors are a type of pressure washer adapter that comes in many sizes and can be used with all machines from major brands like Karcher, Kranzle and Nilfisk ALTO. The benefits of M22 connectors are that they can be used with all different types of machines, including deck cleaners and pressure washers. They also allow you to connect your machine to any hose you want so you can easily change attachments on your machine as needed.
The other common connector is the quick-connect/quick-disconnect style which connects directly into your machine’s output connection point while maintaining an airtight seal between two hoses connected together by means of an O-ring inside each end cap – very similar in appearance
However, many accessories also fit lesser known brands like Champion, Interpump, Kiam, Nilfisk C Hose and Suttner.
However, many accessories also fit lesser known brands like Champion, Interpump, Kiam, Nilfisk C Hose and Suttner. In fact, the M22 male thread connector is generally considered to be an industry standard for pressure washer accessories. It’s often used for high pressure hoses and spray guns because it helps prevent leaking.
Other well known brands that accept the M22 connectors include AR Blue Clean, Beaver, Black & Decker, Bosch, Briggs & Stratton, Campbell Hausfeld, Comet, Dewalt and Draper.
-
AR Blue Clean
-
Beaver
-
Black & Decker
-
Bosch
-
Briggs & Stratton
-
Campbell Hausfeld
-
Comet (All Brands)
-
Dewalt and Draper
If you have a machine from Greenworks or Homelite or Husqvarna or Hyundai or Karcher or Kranzle or Lavor or Nilfisk ALTO then you already have everything you need to switch out your hose and spray gun if you want to.
If you have a machine from Greenworks or Homelite or Husqvarna or Hyundai or Karcher or Kranzle or Lavor or Nilfisk ALTO then you already have everything you need to switch out your hose and spray gun if you want to. You don’t need anything extra.
If your machine is older—say, an Echo, Honda, Michelin pressure washer—then it would have used a different connector that won’t fit newer accessories.
But if you have an older machine from a brand like Echo, Honda or Michelin then your pressure washer would have used a different connector that won’t fit newer accessories.
The short answer is no. All pressure washers have different connectors, so you need to make sure that your connector matches the one on your machine. If you’re buying a replacement accessory for an older machine from a brand like Echo, Honda or Michelin then your pressure washer would have used a different connector that won’t fit newer accessories.
However if you have an older machine from a brand like Karcher, Kranzle, Lavor and Nilfisk ALTO then your pressure washer would use M22 male thread connectors which means they will fit any of the wide range of accessories available today as long as they match up with your machine’s connection type (i.e., M22 female).
Conclusion
The M22 male thread connector is the industry standard for pressure washer accessories. If you have a machine from Greenworks or Homelite or Husqvarna or Hyundai or Karcher or Kranzle or Lavor then your pressure washer already has everything you need to switch out your hose and spray gun if you want to. But if you have an older machine from a brand like Echo, Honda or Michelin then your pressure washer would have used a different connector that won’t fit newer accessories.
