Description
- We are the trailblazer in such a cleaner with sewage recovery system leaving no residual nasty water to deal with.
- The sewage recycle pipe circle and 5-meter-long plastic sewage recycle pipe at the bottom can be used for centralized sewage recycling treatment. Please do remember to turn off the water source and let the tool run for a certain period to drain the sewage before power-off.
- pressure washer surface cleaner is equipped with two high-speed rotating jets where pressure concentrates at 25 degrees to offer a faster and better cleaning. The thick bristles lined underneath the housing help prevent water from splashing.
- Its stainless steel materials, water-proof and anti-deformed functions can ensure you a long-run utility. You can even adjust the height or angles of the wand with the 4 castors moving smoothly.
- It can work with a labor-saving spray gun which requires a connector in 3/8 inch(NOT INCLUDED). We have offered you 2*1/4 connectors if needed.
- It is applicable in such scenarios as home or commercial services and can be perfect on decks, patios, sidewalks, driveways, pool decks, etc.
- Note: Please do remember to remove those large rocks before you start using the tool in order to avert damage to the water outlet.
Sewage Recycling Pipe & 2 High-efficient Nozzles
The steel pipes with small holes play as the sewage after cleaning, its fast 25-degree rotating nozzle offers a better cleaning without causing any damage. Water flows at 8.5GPM.
Sewage Recovery Design
Made of sturdy stainless steel material, it can be used for a long time without corrosion, deformation or damage.
Splash-Proof Design
With the special design, the pressure is concentrated inside the housing and makes your cleaning in order.
Removable Strainer
Built-in replaceable strainer – prevents nozzle clogging.
sewage can be recycled
Heavy-duty Bearing
Built with the highest grade materials, the fully sealed bearing can make the unit work with higher pressure and contribute to long life expectancy.
sewage pipe
With a five-meter long plastic black pipe to discharge sewage
Easy Installation
It’s easy to install by just following the steps above, and it’s simple to use. Just pull the trigger while the pressure washer is on and water will start flowing from the nozzle.
Walk slowly behind the equipment and clean as you go
The 180-degree adjustable handle, 4 universal casters and tough bristles all help you easily operate your pressure washer scrubber.
What should you do if it is blocked？
- You can replace it with a replacement nozzle in the package.
- Please use needles for removing any possible sand or debris, or rinse it with fresh water.
Specifications
-
Material: Stainless Steel
-
Cleaning Surface Area: 20 in/ 51 cm
-
Max. Working Pressure: 4000 PSI
-
Min. Working Pressure: 2000 PSI
-
Max water Flow: 8.5 GPM
-
Inlet: 3/8 in QC Female Plug
-
Outlet: 25-degree Nozzles
-
Max. Water Temperature: 158°F/ 70°
-
sewage pipe：196.8 in/ 500 cm
Please refer to the above screenshot for further installation tips.
