Introduction
Pressure washers are great machines, but they do require some knowledge. You need to know how much pressure you need for the job at hand and what kind of water flow is required. If you’re looking for something that can clean concrete surfaces, a 1600 PSI electric pressure washer isn’t going to cut it. Let’s take a look at why this is the case:
The pressure of a water jet determines how well it cleans
The pressure of a water jet determines how well it cleans. A pressure washer’s cleaning power comes from the amount of PSI (pounds per square inch) it produces. The higher the PSI, the more powerful your pressure washer will be and the better job it can do on tough stains like grease, dirt and oil stains. Most professional-grade models are rated at 3100 PSI or more.
The pressure for a pressure washer ranges from 1300-2800 PSI.
The pressure for a pressure washer ranges from 1300-2800 PSI. The higher the number, the more powerful your pressure washer will be. This means it will clean better and faster, but also that it will cost more money. If you’re just looking to clean your driveway or garage floor with no real intention of using it on tougher surfaces like concrete or brick, then an 800 PSI machine should work fine and save you some money in the process.
It’s not just the PSI that matters. You also need adequate water flow.
It’s not just the PSI that matters. You also need adequate water flow. The water flow is determined by how many gallons per minute (GPM) of water you’re using, and it determines how much pressure your washer can exert on whatever you’re cleaning. To get a good cleaning result, you should use at least 1.5 GPM at 1600 PSI.
If possible, go even higher than this recommendation: 2 to 3 GPM is ideal for concrete cleaning tasks like driveway repairs or power washing a patio surface—but if your pressure washer can only provide 1-1/2 GPM of water flow or less, then try to find ways of boosting its performance by adding more spray heads and increasing their rotation speed so that they’ll give off more coverage in less time with each pass over the surface area being cleaned.
1600 PSI is too low to effectively clean concrete, brick, stucco, siding, driveways and sidewalks.
A 1600 PSI pressure washer is not enough to clean concrete, brick, stucco, siding or driveways effectively. In fact, the minimum pressure required to effectively clean concrete is between 1800 and 2000 PSI.
However, if you’re just looking for a unit that can quickly blast away dirt before washing it down with a garden hose then this will work fine.
1600 PSI electric pressure washers are lightweight and portable but they lack cleaning power
The power unit of a 1600 PSI electric pressure washer is light and portable, making it easy to carry around. However, they lack the cleaning power needed to effectively clean concrete and other surfaces that require heavy-duty cleaning. A better option for concrete surfaces would be 2000+ PSI gas powered pressure washers that can deliver up to 4500 RPMs, meaning they’re much more powerful than their electric counterparts. These types of gas powered machines are also capable of operating on outdoor electrical outlets which makes them ideal for contractors or those with large jobsites where running an extension cord from your garage isn’t practical or safe (i.e., near water).
However, if you have something smaller to wash like a car or sports equipment, it’ll do the trick.
However, if you have something smaller to wash like a car or sports equipment, it’ll do the trick. Electric pressure washers are lightweight and portable but they lack cleaning power. Gas pressure washers can be used for cleaning concrete surfaces and are more powerful than electric pressure washers.
A 1600 PSI pressure washer may be okay for some uses but won’t have enough power to effectively clean concrete surfaces
A 1600 PSI pressure washer may be okay for some uses, but it won’t have enough power to effectively clean concrete surfaces. For example, if you need to clean your car or sports equipment after a game, a 1600 PSI pressure washer is a good choice because it can relieve dirt and debris from these surfaces without damaging them.However, when using a 1600 PSI pressure washer to wash concrete floors or sidewalks at home do not expect good results.If you really need to get rid of dirt from concrete surfaces then consider buying an 1800 PSI or 2000 PSI model instead. The higher pressures will enable you to remove more dirt without having to put extra effort into scrubbing the surface with brushes and chemicals.How Do You Determine If A Pressure Washe Has The Correct Pressure?What is the advertised maximum output pressure?Is there any other information available on the product descriptions?What size nozzle does it come with: 5-10 inch?</html
Conclusion
It’s important to know what kind of pressure washer you need before purchasing one. If you’re looking to clean concrete surfaces or large areas like driveways, sidewalks, decks and patios then a 1600 PSI electric pressure washer isn’t going to cut it. In fact, no electric pressure washers are going to be able to handle this type of work because they lack the power needed for effective cleaning. But if your only concern is washing small items like cars or sports equipment then 1600 PSI may be okay for those uses too
